As a state-of-the-art sawing machine, CNC band saws deliver exceptional precision through computerized control, ensuring consistent product quality. However, operational challenges may occasionally lead to substandard outputs. This article examines the root causes of non-compliance and proposes targeted solutions.


1.The saw blade clamped by the guide angle of the saw machine's guide arm is not perpendicular to the worktable. Secure the saw blade and adjust the guide angle bolt to make it perpendicular to the worktable surface.


2.The material feed rate of the band saw machine is too fast. Adjust the speed control valve to slow down the feed rate.


3.The small bearing in the guide angle of the CNC band saw may be damaged. Replace the small bearing. 


4.The saw blade may be loose. Tighten the saw blade.


5.The saw blade may wear out. If it can be repaired, do so; otherwise, replace it.


6.The gap between the two guide arms of the sawing machine is too wide. Adjust the guide arm spacing, typically 6-10 cm wider than the material.


The above outlines common causes and solutions for CNC band saw machine malfunctions, which we hope will prove helpful. For further insights into CNC band saws and circular saw machines, please visit our official website at LETIPTOP 


If you have any interest, welcome to contact us via email letiptop@tiptopmfg.com for a formal quote and talk to LETIPTOP expert to get the support. For more information, please click CNC Band Saw to view.

CNC_Band_Saw_2.jpg